LNG: TESLARATI

The Tesla Cybertruck is loaded to the teeth with technology that the vehicle is practically a mystery box of hidden features. Couple this with the fact that the vehicle’s unveiling did not really go as planned, as well as CEO Elon Musk pretty much rushing through the truck’s presentation following the pickup’s Armor Glass demo, and many of the Cybertruck’s noatbly cool features remained unsaid.

Fortunately, some of these hidden features have been spotted by the Tesla community, thanks to photographs and videos of the vehicle taken during the unveiling event, as well as images that were released by the electric car maker in the Cybertruck’s press kit. With this in mind, following are the Tesla Cybertruck’s Top 10 hidden features that may have been missed during last week’s unveiling event. Let’s dig in.

Center Fold-Down Front Seat Cup Holders and Storage Area

The Tesla Cybertruck is equipped with three seats on the front, though the middle acts more like a smaller jump seat. As could be seen in test ride videos of the vehicle, this middle seat actually folds down to become a large center armrest. Interestingly, this center armrest doubles as a storage compartment. It also has three cup holders that are fitted right at the middle seat’s back headrest, along with a spare change holder (aka “junk cubby”) for random knick knacks.

Interior Lighting Strip for Rear Seats

Despite its unapologetically futuristic, brutalistic exterior, the interior of the Tesla Cybertruck is actually quite welcoming. Upon entering the vehicle, passengers are greeted by a cavernous interior and a massive glass roof that would surely be a treat for those who love camping in their vehicle. The rear seats are also fitted with an interior lighting strip on the sides, providing illumination for the truck’s passengers at the back. The lights are white too, giving an additional futuristic, Tron-like flair for the Cybertruck’s exterior.

Sun Visor is Flush Against the A-Pillar

Among the clever features of the Cybertruck is its sun visor, which flushes against the A-Pillar. This would be particularly useful considering that the pickup has a massive windshield that may very well dwarf the Model X’s already-expansive windshield in sheer size.

Rear Armrest, Pass-Through for Extra-Long Cargo

The Tesla Cybertruck has a large center armrest in the rear that looks to double as support for extra-long cargo. The all-electric pickup is already equipped with a 6.5-foot bed, which is pretty substantial, but for those who wish to haul even lengthier cargo, the center armrest can fold down and act as a pass-through for items that exceed 6.5 feet. 

Scroll Wheels on the Steering Wheel

The Tesla Cybertruck is fitted with a steering yoke that looks very similar to the one used by the company in its next-generation Roadster prototype. This would likely be changed into a regular steering wheel when the vehicle enters production, but based on test rides of the pickup, it appears that the Cybertruck will utilize Model 3-esque steering wheel controls, complete with the sedan’s scroll wheels.

Autopilot Camera in Fender

Similar to Tesla’s other prototypes like the next-generation Roadster or the Semi during its unveiling, the Cybertruck is not equipped with traditional side mirrors. Instead, the vehicle would likely use a pair of Autopilot cameras in its front fender. Considering existing regulations in regions such as the United States, there is a pretty good chance that the Cybertruck will be equipped with traditional side mirrors when it enters production.

L-Track Rails and T-Slots

The Cybertruck is fitted with L-track rails and T-slots that allow users to place anchor points anywhere in the vehicle’s expansive 6.5-foot bed. This is key to transporting items that may otherwise move about on the pickup’s bed during transport if they are not tied down. With these components in place, Tesla Cybertruck owners would be able carry even fragile items on the rear in a secure manner.

Flush Tonneau Truck Bed Cover Activation Buttons

The Tesla Cybertruck utilizes a motorized tonneau bed cover that can be engaged and disengaged by a flush button on the vehicle’s rear. These buttons, which are notably large and easy to reach, are found on both sides of the vehicle.

Hidden storage underneath vault bed

The Tesla Cybertruck is full of storage areas, one of which is found on the bottom of the vehicle’s 6.5-foot bed itself. Based on images provided by Tesla, this space appears to be large enough to store medium-sized items such as toolboxes and sleeping bags, for those extended outdoor trips.

Hidden storage in sail pillar

For those who wish to use the Cybertuck for work, the futuristic pickup truck is fitted with a hidden storage compartment in its sail pillar. Images of the space shown during a slide at the Cybertruck’s unveiling suggest that the storage areas in the vehicle’s sail may be enough to fit some tools or similarly-sized items.

(adsbygoogle = window.adsbygoogle || []).push({});

On November 18th, NASA announced that it had added commercial Moon lander offerings from SpaceX, Blue Origin, Sierra Nevada Corporation, and others to a pool of companies that will be able to compete to affordably deliver cargo to the surface of the Moon. With this latest addition of landers, competition could get very interesting, very quickly.

In November 2018, NASA revealed a big step forward in its plans to kickstart robotic exploration and utilization of the Moon, announcing nine new partners in its Commercial Lunar Payload Services (CLPS) initiative. Designed first and foremost to encourage the commercial development of unprecedentedly affordable Moon landers, the program’s first nine partners included Lockheed Martin, Astrobotic, Intuitive Machines, Masten Space, Orbit Beyond, and several others.

In May 2019, NASA announced the next step, contracting with three of those nine aforementioned providers to bring their proposed Moon landers to fruition and attempt their first lunar landings. Orbit Beyond dropped out shortly after but Astrobotic and Intuitive Machines continue to work towards that goal and aim to attempt the first Moon landings with their respective Peregrine and Nova-C spacecraft no earlier than (NET) July 2021. Intuitive Machines has contracted a SpaceX Falcon 9 for its first Nova-C Moon launch, while Astrobotic side with the very first launch of United Launch Alliance’s (ULA) next-generation Vulcan rocket.

Generally speaking, the landers offered by the first nine CLPS partners were on the smaller side of the spectrum, capable of delivering around 50-100 kg (100-200 lb) of useful cargo to the surface of the Moon with launch masses around 1500-3000 kg (3300-6600 lb). On November 18th, NASA announced that a second group of partners would be added to the competitive ‘pool’ of CLPS-eligible Moon landers, all of which can technically compete to land a range of NASA payloads on the Moon. The new five are Ceres Robotics, Tyvak Nano-Satellite Systems, Sierra Nevada Corporation, Blue Origin, and SpaceX.

Next to nothing is known about Tyvak’s or Ceres Robotics’ apparently proposed landers, but a render of SNC’s Moon lander concept shares some obvious similarities with its Dream Chaser spacecraft and expendable power and propulsion module, implying that it’s likely on the larger side. Blue Origin and SpaceX, of course, proposed their Blue Moon and Starship spacecraft.

As a 100%-speculative guess, Ceres and Tyvak’s landers are likely in the same ~100 kg-class range as the nine CLPS providers selected before it, while Sierra Nevada’s lander concept is probably closer to 500 kg (1100 lb). According to Blue Origin, it’s recently-updated Blue Moon lander is designed to deliver up to 4500 kg (9900 lb) to the lunar surface and is expected to attempt its first Moon landing no earlier than 2024.

Unsurprisingly, SpaceX’s Starship blows all 13 other lander proposals out of the water and, in the context of the CLPS program, is a bit like bringing a Gatling gun to a paintball match. According to SpaceX, a fully-refueled Starship should be able to land 100 metric tons (220,000 lb) of cargo on the Moon, although it’s unclear if that would allow the Starship to return to Earth.

In simpler terms, there is just no chance whatsoever that the practical scope of NASA’s CLPS program could possibly warrant more than a few metric tons delivered to the surface of the Moon. NASA as a whole doesn’t have the budget needed to build useful several-dozen-ton spacecraft or experiments, let alone CLPS. In that sense, the real question to ask is what could Starship manage if the useful payloads it needs to deliver are no more than a few metric tons?

Assuming SpaceX’s technical know-how is mature enough to allow Starship to preserve cryogenic propellant for weeks or months after launch, it’s entirely conceivable that a Moon launch with, say, 10 tons of cargo could be achieved with just one or two in-orbit refuelings, all while leaving that Starship enough margin to safely return to Earth. Given that NASA awarded Intuitive Machines and Astrobotic approximately $80M apiece to land 50-100 kg on the Moon, it’s far too easy to imagine SpaceX quoting a similar price to deliver 10+ tons to the Moon by enabling full Starship reuse.

All things considered, politics still looms in the distance and there is just as much of a chance that SpaceX (and maybe even Blue Origin) will be passed over by CLPS when the time comes to award the next round of Moon delivery contracts. Still, the odds of something far out of the ordinary happening are much higher with a program like CLPS. Stay tuned!

Check out Teslarati’s newsletters for prompt updates, on-the-ground perspectives, and unique glimpses of SpaceX’s rocket launch and recovery processes.

(adsbygoogle = window.adsbygoogle || []).push({});

Just days following its high-profile unveiling, the Tesla Cybertruck has been spotted accelerating on a public street, followed closely by a blue Model X. Particularly interesting was the fact that the vehicle was captured on film in broad daylight, providing a brief yet notable glimpse at just how futuristic Tesla’s heavyweight pickup really is compared to other vehicles on the road. 

The Tesla Cybertruck sighting was shared on Twitter by Apple enthusiast @AppleJones40, who referenced an Instagram post from CA-based @chicago_roy. Based on the video, the vehicle seemed to be passing through Crenshaw Blvd. right in front of the construction of The Millenium apartment near SpaceX headquarters in Hawthorne, CA. The sighting appeared to have happened in the afternoon as well, based on the shadows of the vehicles in the area.

View this post on Instagram

Spotted @elonrmuskk cruising through Hawthorne in that new @teslamotors pick up truck today. #tesla #spacex #teslatruck #hawthorne #cruising #elonmusk #thefuture #backtothefuture #cybertruck #worldstar #tsr #tmz #balleralert #theshaderoom

A post shared by @ chicago_roy on Nov 25, 2019 at 8:39pm PST

The Tesla Cybertruck is the electric car maker’s boldest vehicle to date, with its extremely competitive price and its distinctly polarizing looks. Elon Musk noted prior to the vehicle’s unveiling that the Cybertruck would look like a pickup that’s straight out of Blade Runner. If the recent sighting is any indication, this really is the case. The Cybertruck was visible for only a few seconds in the recent clip, but its future-forward design compared to other cars in the area is undeniable. 

Also noticeable from the Cybertruck’s sighting was the speed of the massive vehicle. The Cybertruck is a hulking electric car, more massive than a number of popular mainstream pickups. Despite this, the Cybertruck seems very light on its feet, accelerating on the street in complete, smooth silence. 

Public sightings of Tesla’s unreleased vehicles could mean several things. At times, the electric car maker conducts these real-world runs as part of a photoshoot, similar to what it did for the Model 3, which was sighted at Marina Del Rey after its unveiling event. That being said, the Cybertruck’s recent sighting did not involve a camera crew chase car, which could suggest that it is simply undergoing some real-world tests. This has been Tesla’s strategy with its Semi prototype so far, with reports from the electric car community stating that the long-hauler is usually accompanied by engineers in a Model X or S. 

The Tesla Cybertruck starts at $39,990 for its base version, which is equipped with a single motor at the rear and 250+ miles of range. Despite this relatively low price, the Cybertruck comes loaded with several cool standard features, such as a motorized tonneau cover and Standard Autopilot. The vehicle has so far been garnering a lot of interest, with Tesla recording 250,000 reservations for the vehicle to date.

(adsbygoogle = window.adsbygoogle || []).push({});

Rocket Lab, the global leader in dedicated small satellite launches, has had quite the productive year, breaking ground on a new U.S.-based launch pad, successfully launching five orbital launches, and announcing plans to send small satellites and small payloads to lunar orbits.

The company also unexpectedly announced plans to attempt to recover and reuse Electron rocket boosters much like SpaceX’s Falcon 9, perhaps as soon as 2020. Just three months after that surprise, the company’s tenth Electron launch is on track to serve as a crucial step and flight test in pursuit of Rocket Lab’s very first booster recovery attempts.

Electron Flight 10 has slipped about a week but is now on track to lift off no earlier than 11:56 pm EST, November 28th (07:56 UTC, Nov 29).

Booster recovery – the new not new rocket version of reduce, reuse, recycle

Rocket Lab explained that recovery efforts would occur in two distinct phases. Phase 1 would involve recovering expended Electron boosters from the ocean off the coast of New Zealand and transporting back to the Rocket Lab’s headquarters for careful inspection. This process is reminiscent of previous practices completed by NASA during the shuttle era to retrieve the Shuttle’s Solid Rocket Boosters from the Atlantic Ocean. The boosters were retrieved and towed back to Port Canaveral, Florida to be inspected and refurbished at Kennedy Space Center.

Although rocket booster recovery is not new in the world of orbital rocketry, it is a new objective for Rocket Lab. In fact, founder Peter Beck stated he would have to “eat his hat” after previously and repeatedly stating that Rocket Lab would never pursue reusability for Electron. After Phase 1, Rocket Lab hopes to attempt its first true Electron ‘catches’. Unlike competitor SpaceX, whose Falcon 9 and Heavy boosters land propulsively on land or sea-based landing pads, Rocket Lab has opted to pursue Electron recovery with parachutes and grappling hook-equipped helicopters.

Electron’s upcoming tenth launch – nicknamed “Running Out of Fingers,” – will feature a new block upgrade for Electron’s first stage booster and will mark the first flight test of recovery hardware. Cold gas attitude control thrusters are the most obvious addition on the upgraded booster and will be used to orient Electron first stages in lieu of aerodynamic control surfaces like SpaceX’s iconic choice of grid fins. In a statement, however, Rocket Lab clarified that although the first stage includes new upgrades, it will only be used to gather data and inform future recovery efforts – no recovery attempts will be made after the next few launches.

Electron Flight 10 is a common rideshare mission that will place seven small satellites in orbit. Among the payloads is a rather fascinating spacecraft called the 2nd Satellite or ALE-2, built by the Tokoyo based ALE Company.

According to a statement posted to the company’s website, the spacecraft “will take on the challenge of materializing a [human]-made shooting star.” The spacecraft produced in conjunction with Spaceflight features four hundred spheres – each 1cm in diameter – that will be gradually ejected to burn up in Earth’s atmosphere, creating artificial shooting stars.

Behind the scenes at LC-1 and HQ

Ahead of the all-important tenth Electron launch, Rocket Lab treated its social media followers to some rare glimpses into the production process and the stunning Launch Complex-1 (LC-1) located on the Mahia Peninsula in New Zealand. A video posted to YouTube takes viewers on a digital tour around Launch Complex -1 as well as inside the Electron Production Complex.

In the Production Complex, a revolutionary robot named “Rosie” provides a level of automation that takes over the tedious work of processing a rocket body that has been traditionally completed by humans. Rosie the Robot is able to process an entire carbon composite shell of the Electron booster in just twelve hours. The automation machine also finishes out Rocket Lab’s Kick Stage and protective payload fairings. The piece of processing machinery will assist Rocket Lab in matching production and launch frequency of the Electron rocket with the 120 launches per year that LC-1 is licensed to support.

Rocket Lab’s tenth Electron launch is currently on track for Thursday, November 29th from 0756-0922 GMT (2:56-4:22 a.m. EST).

(adsbygoogle = window.adsbygoogle || []).push({});

German automakers Audi and BMW are facing painful cutbacks as each company attempts to accelerate its efforts towards electromobility. Based on recent reports, Audi will be engaging in drastic job cuts that would reduce its manpower in Germany by the thousands while BMW will be engaging in cost-cutting measures that would affect the compensation of its employees. 

In a recent report, German news agency tagesschau.de revealed that Audi will be cutting 9,500 of 61,000 jobs in the country. In place of the employees who would be facing job cuts, Audi is planning on hiring 2,000 electric mobility specialists instead. The job cuts, as well as the hiring of the 2,000 e-mobility specialists, are expected to be completed by 2025.

Part of the reason behind these drastic cuts is the sheer under-utilization of Audi’s facilities. According to the German news agency, the 61,000 employees at the two German plants in Ingolstadt and Neckarsulm are largely under-utilized. The Neckarsulm facility, for example, has a capacity of 300,000 cars annually, but its current output is far less, partly due to the region’s shift away from the internal combustion engine.

Outgoing CEO Bram Schot explained the job cuts in a statement to the German publication. “In times of upheaval, we are making Audi more agile and efficient, increasing productivity and strengthening the competitiveness of our German operations in the long term,” he said. 

In a way, a notable part of Audi’s struggles lies in the auto industry’s shift towards electric mobility. This is something that is also being felt by fellow German automaker BMW, which recently announced that it will be adopting some painful cost-cutting measures as well. 

According to a Bloomberg report, BMW will be reducing bonus payments for employees in Germany. The veteran carmaker noted that this was done to avoid drastic measures such as those being adopted by Audi. This was explained at a staff meeting in Munich on Wednesday by new BMW CEO Oliver Zipse. “Together with the works council, we have reached a common solution. This allows us to avoid drastic measures that others are taking to reduce their costs,” he said. 

It should be noted that BMW’s cuts to its German employees are only part of the veteran automaker’s plan to save over 12 billion euros ($13 billion). These savings will then be used as additional funds to developing new vehicle technologies, one of which is the rollout of the company’s all-electric vehicles. BMW has some catching up to do on this front, as the company’s battery-electric cars are still headlined by a vehicle that is long in the tooth: the BMW i3, which was released back in 2013.

Between the two companies, Audi is ahead considering that it has already released the e-tron, a fully-electric SUV, to the market. That being said the e-tron suffers from poor range and efficiency, with the vehicle only receiving a 204-mile EPA rating despite its 95 kWh battery. BMW, on the other hand, has vehicles like the i4 and the iX3 on the way, though the vehicles are not yet in production.

(adsbygoogle = window.adsbygoogle || []).push({});

Elon Musk has hinted on Twitter that the infamous Boring Company “Not-a-Flamethrower” may be included as an option for the newly released Tesla Cybertruck.

The popular post-apocalyptic theme television program The Walking Dead posted a tweet identifying the Cybertruck as a prime candidate for the perfect vehicle to use in the event of a zombie apocalypse. And who could argue? The truck would not dent or break in the event of a zombie takeover. The truck’s durability was displayed during its unveiling event on November 21, where Tesla designer Franz von Holzhausen slammed into the driver’s side door with a sledgehammer. The truck would more than likely get the driver and its 5 other passengers several hundred miles away, especially if the Tri-Motor variant with a 0-60 MPH time of 2.9 seconds and 500+ miles of range is being used.

Musk entertained the idea of the truck being beneficial for evading capture from the rising dead and offered an extra bit of assistance from his past Boring Co. project, the “Not-a-Flamethrower.”

The finest in apocalypse protection technology! Flamethrower optional.

— Elon Musk (@elonmusk) November 27, 2019

Musk said on an episode of the Joe Rogan Experience that his Boring Company created the 20,000 Flamethrowers (that sold out in four days) as an “off-the-cuff idea” inspired by the movie Spaceballs. The 1987 film that has been a driving factor behind some of Musk’s high-performance powertrains like Ludicrous Mode and the yet-to-be-released Plaid Mode, was also behind the (Not-a-)Flamethrower. “Yogurt (a character in Spaceballs) goes through the merchandising section, and there’s a Flamethrower…and we said ‘we should do a flamethrower,” Musk said during his interview with Joe Rogan.

While the Not-a-Flamethrower sold out extremely quickly, the name was given to it so international customs agencies could not deny delivery of the modified roofing torch to buyers located outside of the United States. While the Boring Company does not have Flamethrowers available for purchase through its website, it can be found on eBay and they vary in price. We know there is still interest in the Flamethrower, especially from UFC Star Conor McGregor, who recently requested two of them with his Cybertruck pre-order.

While we don’t know if Musk is serious about adding this feature to the Cybertruck, we have learned in the past to never count his ideas out, even if they may seem far fetched and somewhat outlandish. He’s added some extremely unique features for Tesla vehicles, like his hilarious references to “Toilet Humor,” which eventually resulted in the Emissions Testing Mode Easter Egg. After all, the man did invent a Flamethrower to begin with, so who is to say he won’t add it as an optional feature with the all-new Cybertruck.

You can watch Elon Musk talk about his “Not-a-Flamethrower” on the Joe Rogan Experience below.

(adsbygoogle = window.adsbygoogle || []).push({});

Toronto-based Dbrand best known as the maker of high-quality wraps and skins for electronic devices has shifted its focus from handheld technology and gaming to Tesla’s newest vehicle: the Cybertruck. DBrand offered a few statements regarding its skins, along with a funny tidbit about the infamous glass demonstration.

You’re a Mars-bound, multi-billionaire, meme-tweeting tech-Messiah who walks the line between genius and super-villain. You wake up one day and decide to design an electric pick-up truck. There’s just one problem: all you have is a pencil and ruler. Enter the Cybertruck. With the help of dbrand’s Cybertruck skins, you can pretend to save the world with style, grace, and the assurance that our toolkit contained more than just a straight-edge and a writing utensil. Oh, and Elon – we happen to know a thing or two about impact-resistant glass protection. Make sure to have Franz pick up a Prism before your next on stage demo.

Dbrand is the first company to formally offer wraps for the Cybertruck. While the truck was only unveiled to the public by Tesla less than a week ago, customization options are already becoming available for the truck. Production will not begin until the end of 2021, nearly two years after the truck was unveiled. Since the event, CEO Elon Musk has stated Tesla has received over 200,000 preorders for the vehicle.

This is not a joke.https://t.co/b2LXy9HZ5N pic.twitter.com/5q4wcLJwXU

— dbrand (@dbrand) November 26, 2019

Wrapping vehicles is a popular practice among the Tesla community, giving owners the option to change and personalize the look of their vehicles without having to repaint a vehicle. Costs can vary greatly and range between $3,000 to $10,000, depending on the material finish and labor.

DBrand is offering 36 different patterns, from carbon fiber to wood grain for the Cybertruck. All of these patterns are available for phones, laptops, gaming consoles, and now Tesla’s Cybertruck. The wrap comes in seven different sections and patterns and can be mixed and matched for an exciting and creative look. Dbrand’s is offering the entire vehicle wrap kit for $3,094.80.

Tesla’s Cybertruck was unveiled on November 21 in Los Angeles at the SpaceX rocket facility, a fitting venue as the truck utilizes the same stainless steel material that the aerospace exploration company uses for its rockets. Currently, the Cybertruck is only available for pre-order in its silver, stainless steel color scheme, and Tesla CEO Elon Musk has mentioned that it will likely be available in Matte Black in the future.

(adsbygoogle = window.adsbygoogle || []).push({});

Tesla’s Cybertruck has caught the world’s attention due to its polarizing design. While it is undeniably futuristic, the vehicle’s design is so much different from every other pickup truck on the market that it is proving to be an acquired taste. Despite this, support for the vehicle is spreading quickly. This has been teased by statements from several walks of life, from law enforcement members to titans of the gaming industry, to one of the most recognized icons in the world of sports entertainment today.

When Tesla CEO Elon Musk unveiled the Cybertruck on November 21 in Los Angeles, he said it was made to be tough. The company moved the mass of the vehicle to the outside, recognizing this design as an “exoskeleton” that will make the truck durable and long-lasting. This idea was displayed through a demonstration involving a sledgehammer and the truck’s door.

Tesla designer Franz von Holzhausen slammed the driver’s side door with the sledgehammer multiple times without doing any sort of cosmetic damage to the truck. The Cybertruck’s tough design does not fit the traditional age-old stereotype of electric vehicles being weak and underpowered — an idea that many non-electric car enthusiasts hold onto.

The unusual design choice Tesla chose for its first pickup truck, while polarizing and unusual, caught the attention of many people, including Kansas Highway Patrol member Ben Gardner, who stated he was interested in using the Cybertruck while on duty. Trooper Ben, as he is known as on Twitter, started the speculation when he tweeted “Hear me out…. #Cybertruck patrol vehicle?! #SignMeUp.” This tweet was met with renderings from a designer named Daniel Scott, who provided a render of the Cybertruck as a police vehicle. 

Lets make it happen! 😀

Look out #DistractedDriver and #ImpairedDrivers ! https://t.co/PMThI02qMH

— Trooper Ben (@TrooperBenKHP) November 25, 2019

Tesla vehicles have been utilized by some police forces in the United States, including a Model S for the Fremont PD near the Tesla factory in California, and a Model 3 in Bargersville, Indiana.

Another prominent figure from another industry has requested a Cybertruck design from Elon Musk. Min-Liang Tan, CEO of Razer, a gaming hardware manufacturing company, has requested a Cybertruck themed with his company’s logo and color scheme. Tan tweeted the Tesla CEO on November 25, sending a pretty slick-looking render of the black and green Razer themed Cybertruck, along with a question regarding Tesla’s status in his home country of Singapore.

.@elonmusk can I get a custom Cybertruck in @Razer colors? Also, what’s going on with getting a @Tesla in Singapore! Am still waiting on it! Pic Credit: Mike G pic.twitter.com/6L5U9jfw1E

— Min-Liang Tan (@minliangtan) November 25, 2019

Tan’s proposed design for his custom Cybertruck even caught the attention of Musk, who liked the tweet.

Finally, one of the biggest sports icons in the world today has complimented and requested a pre-order of the Cybertruck. Ultimate Fighting Championship (UFC) superstar Conor McGregor tweeted Musk following the CEO’s announcement of 200,000 Cybertruck pre-orders. McGregor, who is known throughout the world as “The Notorious,” is known for his flashy clothing and cars. The man who regularly sports designer threads and some of the fastest sports cars in the world focused on the impressive pre-orders the truck has received. But McGregor did not stop there, as he also requested a couple of Boring Company flamethrowers in the process, too.

= 20,000,000. Nice!
Put me down for one also, please Elon. And two flamethrowers.

— Conor McGregor (@TheNotoriousMMA) November 25, 2019

The man who is the first fighter in UFC history to hold championship belts at two separate weight classes is known for his flashy style both inside and outside of the Octagon, McGregor is a longtime follower of Musk on Twitter. Perhaps he is looking to add some high-performance, electric-powered vehicles to his fleet of automobiles.

Kansas Highway Patrol, the Razer CEO, and the MMA fighter are but the tip of the iceberg for notable personalities who are starting to warm up to the Tesla’s polarizing pickup truck. YouTube superstars, musicians, and social media influencers have also publicly stated that they have posted reservations for the vehicle.

As the Cybertruck nears the quarter-million pre-order mark, the truck’s unique shape and design have obviously won many people over. It seems that the Cybertruck is becoming the “cool” truck of the next decade, a truck that some of the toughest, most bleeding-edge people in the world have their sights set on. The boldness of Tesla to release the truck has caught the attention of leading figures in their respective fields, making it one of the most talked-about vehicles today.

(adsbygoogle = window.adsbygoogle || []).push({});

A SpaceX customer has announced that one of a future Falcon 9 rideshare missions will carry a technology demonstrator designed to prove that space stations can one day be built in space by cannibalizing expended rocket upper stages.

On November 18th, commercial space company Nanoracks revealed that it had manifested its first “In-Space Outpost” mission on one of SpaceX’s recently-announced Falcon 9 rideshare missions, scheduled to launch as early as Q4 2020. Known for its successful efforts to use the International Space Station’s capabilities to affordably deploy hundreds of commercial small satellites, Nanoracks has also branched out into organizing rideshare opportunities for smallsats on much larger launches, another method of lowering costs.

Most recently, however, Nanoracks began to pursue a new venture centered around building unprecedentedly affordable human-rated space stations in Earth orbit. While not fundamentally new, Nanoracks proposed a unique solution: modify expended launch vehicle upper stages already in orbit to build space stations in-situ.

It’s anyone’s guess whether such a concept can actually produce safe, affordable space stations and do so more effectively than the obvious alternative of designing, building, and launching already-finished space station components. Nevertheless, Nanoracks has firmly decided to attempt the feat. The technical hurdles alone will require numerous in-space demonstrations of custom hardware, and the Outpost Nanoracks has manifested on a Q4 2020 Falcon 9 rideshare mission will be the first of those attempted demonstrations.

“As a member of the Outpost program team, Maxar will develop a new articulating robotic arm with a friction milling end-effector for this mission. This friction milling will use high rotations per minute melting our metal material in such a way that a cut is made, yet we anticipate avoiding generating a single piece of orbital debris.

The mission is targeting a Q4 2020 dedicated rideshare mission, will fly on an ESPA ring, and will activate after the deployment of all other secondary payloads is complete. As our mission commences, we will have 30 minutes to one hour to complete the cutting of three metal pieces that are representative of various vehicle upper stages, including the Centaur 3. Nanoracks plans to downlink photos and videos of the friction milling and cutting.”

Nanoracks, 11/18/19

As described above, the first Outpost test will focus on proving that the metal tanks of upper stages can be manipulated and cut in orbit with robotic arms to be built by Maxar. The experimental mission will reportedly take place while the payload is still attached to Falcon 9’s upper stage payload adaptor and will carry along three separate propellant tank coupons instead of attempted to mill and cut Falcon 9 itself.

As one of SpaceX’s proposed rideshare missions, Nanoracks will likely be just one of a few dozen other customers or spacecraft catching a ride, and the Outpost experiment will only begin after all other satellites have successfully deployed. Earlier this year, SpaceX announced that Smallsat Rideshare Program and rapidly modified it soon after, adding numerous new launch opportunities and lowering the base price to from ~$2.25M (150 kg) to $1M for 200 kg (440 lb) of spacecraft or experiments. Aside from 3-4 annual dedicated launches, SpaceX also plans to reserve some amount of space on certain Starlink launches, dozens of which are currently planned annually.

Nanoracks’ Outpost-1 mission is expected to launch no earlier than Q4 2020.

Check out Teslarati’s newsletters for prompt updates, on-the-ground perspectives, and unique glimpses of SpaceX’s rocket launch and recovery processes.

(adsbygoogle = window.adsbygoogle || []).push({});

The Tesla (NASDAQ:TSLA) Cybertruck’s unveiling event could have easily gone better, with the vehicle’s disruptive specs and pricing pretty much getting pushed to the background by media coverage of the pickup’s less-than-stellar Armor Glass demonstration. Cracked windows aside, the fact remains that the Cybertruck starts at $39,990, a price that’s as aggressive as the vehicle’s almost brutalist design. It’s also a price that shows that Tesla is at a point where it actually can experiment and be bolder than usual. This should scare TSLA critics. 

The Cybertruck is a massive vehicle, as long as a Ford F-150 and far more powerful as teased by the company’s tug-of-war demo that it briefly showed during the pickup’s unveiling. It’s also unapologetically futuristic, with a 17″ landscape infotainment screen that’s not found in any of Tesla’s other vehicles. It has pop-out door handles that are directly inspired by the premium-priced Model S as well. And these are just the tip of the iceberg, as the Cybertruck has a ton of other features and capabilities that make it a great vehicle for work and play. 

Yet, the monster of a truck that Tesla unveiled starts at a price that’s just slightly above the base price of the Model 3 sedan. There was a reason why gasps could be heard at the vehicle’s unveiling when the Cybertruck’s pricing was revealed. Elon Musk has noted during his interview with Tesla owner-enthusiast Ryan McCaffrey last June that the Cybertruck will start at $49,000 at the most. Absolutely no warning was given that Tesla was going for a far more aggressive starting price, especially considering the vehicle’s built-in tech such as its adaptive suspension and basic Autopilot capabilities. 

The fact that the Cybertuck is designed in such a polarizing manner suggests that Tesla has some funding to spare. By releasing such a vehicle, the electric car maker has shown the auto market that it is at a point where it can be bold and take ridiculous risks such as releasing a truck that looks nothing like a conventional pickup. Elon Musk has admitted as much, noting during an appearance at veteran tech journalist Kara Swisher’s Recode Decode podcast that if the Cybertruck were to fail, Tesla will make a more conventional truck. Musk’s words then, spoken over a year ago, rings true today. 

“I’m personally super-excited by this pickup truck. It’s something I’ve been wanting to make for a long time. And I’ve been iterating sort of designs with Franz. If there’s only a small number of people that like that truck, I guess we’ll make a more conventional truck in the future. I think this is the kinda thing the consumer would want to buy, even if they don’t normally buy a pickup truck. So, anyway, that’s personally I’m most excited about. But like I said, it could be just like, okay, I weirdly like it and other people don’t. That’s possible. But we’re gonna make it anyway, and then we will just have a niche audience, I don’t know. But if it does, then we’ll make a more conventional pickup truck,” Musk said. 

Tesla has, for the most part over the years, operated with limited resources. Elon Musk is a risk-taker, and some of these were so notable that they were considered as “bet-the-company” situations. The Model 3 was one of these, with Musk noting that if the all-electric sedan were had failed, it would have likely ruined Tesla for good. Considering the bold direction that the company took with the Cybertruck, as well as Elon Musk’s statements last year, it definitely appears that the all-electric monster pickup that Tesla just unveiled is not a bet-the-company vehicle. It is a truck that would be great if it succeeded, but it is also a vehicle that could be replaced if it were to fail. 

This should be a chilling thought for Tesla critics, particularly those who feverishly wait for the next quarter’s numbers in their excitement to see TSLA stock drop. After all, if the Cybertruck were to fail and if Tesla were to make a conventional pickup truck, there is a good chance that the company’s more traditional truck would be even more aggressively priced. Such a pickup would likely outperform diesel-powered rivals as well in classic Tesla fashion as well. Such a truck, combined with Tesla’s ever-growing charging infrastructure and its ever-evolving Autopilot system, would have the potential to clean house in a manner that is not as kind as the Cybertruck, which will always be polarizing. 

Tesla is a resilient company, one that weathered one of the worst financial crises in recent history, and it’s led by a man that’s hell-bent on pushing sustainable transportation by proving that electric cars are better in every way than fossil fuel-powered vehicles. It’s best to note that a Tesla with limited resources has proven that it can still disrupt established industries with well-designed, safe, and feature-rich electric cars. A Tesla with resources to spare? That’s a downright frightening idea if one is a TSLA critic.

Disclosure: I have no ownership in shares of TSLA and have no plans to initiate any positions within 72 hours.

(adsbygoogle = window.adsbygoogle || []).push({});